Crmgo Blog

Windows IPSEC. Adding a static route

← Blog

lomix

Windows IPSEC. Adding a static route

To bring up IPSEC, you need to do two things: Configure and enable routing and remote access. Create a rule in the Firewall under "Security and Connection Rules." After that, everything seemed to work except for one-way pings. It turned out that routing needed to be configured. On the server, where…

Windows IPSEC. Adding a static route

To set up IPSEC, you need to do two things:

  1. Configure and enable routing and remote access
  2. Create a rule in the Firewall under "Security and Connection Rules"

After that, everything seemed to work except for one-way pings. It turned out that routing needed to be configured.

On the server where IPSEC is set up:

route -p add 192.168.0.0 mask 255.255.255.0 0.0.0.0 IF 1

 

On the other PCs:

route -p add 192.168.0.0 mask 255.255.255.0 192.168.1.233

<# 192.168.0.0 - удаленная сеть на которую ходим через IPSEC
::192.168.1.233 - локальный адрес сервера с IPSEC #>

Note: This post may be AI-assisted and then human-edited. Editorial responsibility: Dmytro Lomaka, Kaltenkirchen.